Timing Belts & Special Order Only

Request for Quote

HTD-TYPE

TRAPEZOIDAL

T-SERIES & AT-SERIES

All T-Series and AT-Series belts are available by Special Order only. Order T2.5, T5, T10, T20, AT10, AT20 tooth profiles. T-Series available to order in most lengths and widths from 102.5mm long pitch length to 7050mm long pitch length. AT-Series available to order in most lengths from 220mm long pitch length to 4030mm long pitch length. For belt part number, measure width, pitch and length (mm).
T-Series Example: 50-T10-1000= 50mm wide; 10mm pitch; 1000mm long
AT-Series Example: 50-AT10-1000= 50mm wide; 10mm pitch; 1000mm long

DUAL SIDED

All Dual Sided timing belts are available by Special Order only. Order MXL, XL, XXL, L, H, XH, XXH, T2.5, T5, T10, T20, AT10, 3M, 5M, 14M, HTD, S8M tooth profi les. Available to order in most lengths and widths from 500mm long pitch length on the small tooth profi les to 6900mm long pitch length on the large tooth profi les. For Dual Sided Timing Belt part number, indicate the timing belt and note a “D” at the beginning of the part number as shown below.
HTD: D2000-8M-50= Dual Sided 2000-8M-50 Trapezoidal: D400-H-100= Dual Sided 400-H-100
T-Series: D50-T10-1000= Dual Sided 50-T10-1000

VARIABLE SPEED

All Variable Speed belts are available by Special Order only. Order in widths up to 4.0” top width; in cut edge lengths from 22” to 118”; in thickness up to 1.0”. Four parts make up a Variable Speed part number: top width in sixteenth of an inch, angle of sheave groove, “V” for variable speed, and pitch length to the tenth of an inch.
Example: 1930V400= 19/16” top width; 30 angle of sheave groove; 40.0 pitch length

AUTOMOTIVE

All Automotive V-Belts are available by Special Order only. Order cut-edge molded cogged or laminated construction. Available in top widths of .380”, .440”, or .500” and metric cross sections of AVX10 or AVX13. Order lengths from 20” to 132”. For belt part number, use width in 32s of an inch followed by OC measurement to the tenth of an inch.
Example: 15440= 15/32” top width; 44.0” OC

BESTLINK

Use Bestlink belts as a temporary replacement or permanent substitute for conventional rubber v-belts. Simply “Twist and Lock” belt tabs into place, no need for special tools. Great alternative for use on machinery that ordinarily would need to be disassembled for a simple v-belt installation; take apart the belt, not the machine. Keep machines up and running at the same horsepower ratings as conventional rubber v-belts. Ideal for emergency repairs and replacements; keep a few link belts on hand instead of a large inventory of multiple sized v-belts. Make any belt length you need, by hand, in seconds. Bestlink belts are manufactured in standard v-belt cross sections to run in industrial standard pulley grooves. Belts come in easy to use cartons in roll lengths of either 25ft or 100ft. Available sizes are: 3L (3/8” top width), A (1/2” top width), B (5/8” top width), C (7/8” top width)

OPEN-END

Open End V-Belts are available in stock in B and C cross sections. Open End Timing Belts and A cross section Open End V-Belts are available by Special Order only.
An Open End V-Belt part number consists of AVO, BVO or CVO and the roll length in feet. Open End V- Belt Example: BVO.164ft= B cross section; 164 feet long
Three parts make up an Open End Timing Belt order, “LL” (Long Length), belt part number (tooth profi le and width) and roll length.
Open End Timing Belt Examples: HTD: LL8M.20.100M= 8M; 20mm wide; 100 Meters long Trapezoidal: LLH.050.300ft= H; 0.50” wide; 300 Feet long
T-Series: LLT10.20.50M= T10; 20mm wide; 50 Meters long AT-Series: LLAT10.25.50M= AT10; 25mm wide; 50 Meters long